Operating Modes
Leuze electronic
APG-02
11
T
N
T
35/
7-
24V
DEUTSCH
ENGLISH
FRANÇAIS
IT
ALIANO
ESPAÑO
L
NEDERLANDS
7
Operating Modes
Before the desired operating mode can be set, the AS-Interface-Handheld must be switched
on by pressing the ADR button.
The desired operating mode is set by pressing the MODE button. Press the MODE button until
the desired operating mode is displayed in the LCD.
The AS-Interface-Handheld APG-02 supports the following operating modes.
:
Display in
the LCD
Operating mode
Comments
ADDR
Addressing mode
Read and write AS-Interface slave
addresses
ID
Read ID-code
ID1
Read and write ID-code 1
ID2
Read ID-code 2
IO
Read IO-code
DATA
Read and write data
Read and write input or output
data of an AS-Interface slave
PARA
Display and write parameters
Display and write AS-Interface
slave parameters
PERI
Read the peripheral fault flag
Changing the variable values in running processes can cause personal
injury and damage to equipment when function disturbances or pro-
gram errors occur.
Before executing the functions DATA or PARA make sure that no dan-
gerous conditions can occur.
