Leuze electronic 50113669 Manual Download

Page: 42 / 68

Display and control panel AMS 301i

AMS 301

Leuze electronic

8.2.3

Control buttons

Navigate upward/laterally.

Down

Navigate downward/laterally.

ESC

Exit menu item.

ENTER

Confirm/enter value, change menu levels.

Navigating within the menus

The menus within a level are selected with the up/down buttons

The selected menu item is activated with the enter button

Press the ESC button

to move up one menu level.

When one of the buttons is actuated, the display illumination is activated for 10 min.

Setting values

If input of a value is possible, the display looks like this:

Use the

and

buttons to set the desired value. An accidental, incorrect entry can

be corrected by selecting

<-|

and then pressing

Then use the

buttons

to select

Save

and save the set value by pressing

Selecting options

If options can be selected, the display looks like this:

Select the desired option with the

buttons. Activate the option by pressing

ESC

100

<-|0123456789 save

Default ----------------- unit

126

| |

elete character

Enter digit

Save

o OFF

Default ----------------- unit

OFF

| |

Summary of Contents for 50113669





































































Search results

Summary of Contents for 50113669

Reviews:

Related manuals for 50113669

Brands by name

Popular brands

Leuze electronic 50113669, Manual

Search results

Summary of Contents for 50113669

Reviews:

Related manuals for 50113669

Brands by name

Popular brands