Letus 35 extreme, User Manual

Page: 5 / 16

Letus35 Extreme User Guide
3
IOC Prism System to correct the image so it is right side up »
Virtually Quiet: The Vibrating Ground Glass emits nearly no operational »
noise.
Highest Optical Grade Achromatic lens custom-made for the Letus35 »
Extreme 35mm DOF Adapter.
Custom Condenser specially tailored for the Letus35 Extreme 35mm »
DOF Adapter optimizing Image Quality.
New and improved Ground Glass Design: Beautiful Film-Like Bokeh, ac- »
curate color reproduction, absolutely no vignetting and the best Edge-
to-Edge Sharpness in the industry.
A sleek On/Off indicator with LED. »
Easy alignment »
Fully Enclosed batteries secured by tough magnets for ease of replace- »
ment in the field.
Extreme Durability, Professional Look: Casing milled from Solid Alumi- »
num and finished in black.
Installation and Setup II.
Unpacking: A.
Remove the aluminum rear cap. 1.
Remove the plastic front cap. 2.
Connecting The Letus35 Extreme To B.
The Camera:
Using the Allen Wrench Tool included with 1.
your package, loosen the three (3) screws
located on the Back of the Letus35 Extreme
35mm DOF Adapter and carefully remove
the Camera Connection Ring.
Hand tighten the connection ring onto the 2.
camera filter thread (Caution: Do NOT over
tighten the ring to the camera threads as
doing so may cause damage to your cam-
eras threads).
Aligning The Adapter: C.
Turn on your camera and zoom all the way 1.
out.
Fit the adapter into the ring and look at 2.