8
2. System Installation
Exit pairing mode by pressing LEARN button: thermostat’s HOME page can be
returned by keep pressing
.
Once thermostat and receiver were paired successfully, and their RF communication
started normally,
will show up on the top right corner of thermostat’s screen.
(4-2) When
is flashing on the screen’s left side, press
to send the
pairing command with receiver;
Pairing succeed if
flashing on screen’s right side, pairing failed if E01 or E02
is flashing on screen’s right side. In this case, you need to send the pairing command with
receiver by pressing
once again until pairing success.
