7
2. System Installation
2.3 System Check
2.3.1 RF signal pairing
The room thermostat has already been pre-bound with receiver’s
OVERRIDE
I
in kit LS99111010 when delivered.
You may directly move
to RF signal pairing between room thermostat and gateway, please refer
to 2.3.1.B.
A. RF signal pairing between room thermostat and receiver
Start receiver’s RF pairing mode by hold-pressing on its LEARN button for 3 seconds,
receiver is ready for RF signal pairing when its light flashing.
Press OVERRIDE
I
or
II
(you must choose according to your real wiring work on
receiver) to pair with thermostat; when light of OVERRIDE
I
or
II
is flashing, it means
OVERRIDE
I
or
II
is ready to pair with thermostat next.
Thermostat sends pairing command with reciver:
(4-1) Long press
to enter Menu Selection,when
are flashing,
press
to enter RF pairing interface.
Preparation: thermostat and receiver should be powered/wired correctly, make sure
the visible distance between thermostat and receiver is not more than 5 meters.
