Letatwin MAX LM-550A/PC A11 Page 6 Instruction Manual Download

Page: 6 / 69

BE SURE TO READ

CAUTIONS



Contents saved in the internal memory cannot be permanently saved. Please note

that we are not responsible for damages or lost profits resulting from data loss
attributable to battery consumption, problems, repairs, etc.



Do not share the electric outlet with other equipment (such as air conditioner,

refrigerator, microwave, office automation equipment, electrical power tools, etc.) which
requires a large electrical capacity

–– if the voltage drops, then the machine could

malfunction.



Never lick the ink ribbon, tubes and tapes.



Make sure to place the machine on the stable and horizontal work table. Avoid unstable

or inclined place. It may lead to an injury or damage to the machine.



Do not touch the power inlet. It may lead to damage of the printer by electrostatic.



When the machine will not be used for a long time period, disconnect the power plug

from the electric outlet, for safety.



Prior to moving the machine to another place, make sure to disconnect the power plug.

Moving the machine to another place with leaving the power plug connected may lead
to damage of the power plug or the AC cord, which may result in a fire or electric shock.



When replacing the half cutter, make sure to turn off the power beforehand. Otherwise,

the machine may unexpectedly operate and lead to an injury.

Summary of Contents for MAX LM-550A/PC A11






































































Search results

Summary of Contents for MAX LM-550A/PC A11

Reviews:

Related manuals for MAX LM-550A/PC A11

Brands by name

Popular brands

Letatwin MAX LM-550A/PC A11, Instruction Manual

Search results

Summary of Contents for MAX LM-550A/PC A11

Reviews:

Related manuals for MAX LM-550A/PC A11

Brands by name

Popular brands