Letatwin MAX LM-550A/PC A11 Instruction Manual Download Page 58

Page: 58 / 69

6. FUNCTIONS

6-14 COPY / PASTE

Copying a block in the document and pasting it to the cursor position.

The setting value (size, character width, repeat and sequential number) of a block can also

be copied and pasted.

6-14-1 COPY

1. Press

◄/► key, move the cursor under the block

you want to copy.

2. Press SHIFT

→ MEMORY (COPY).

6-14-2 PASTE

1. Press

◄/► key, move the cursor under the block

you want to paste.

2. Press SHIFT

→ IMAGE (PASTE).

6-15 MEMORY

6-15-1 INTERNAL MEMORY

The created documents and their setting values can be saved in the internal memory.

The saving capacity is up to 50 files and up to 61,250 characters in total (depending on the

file contents).

and

can also be saved.

1. Press MEMORY . The [

MEMORY setting

screen

] appears.

▲

２０．０ＣＵＴ００１

ＣＯＭ

ＴＵＢＥ３．２ｍｍ

ＡＵＴＯＳＴＤＳＴＤ００２

ＣＯＭＣＯＭ

▲

２０．０ＣＵＴ００１

－ＰＡＳＴＥＤ－

［ＩＮＴＥＲＮＡＬＭＥＭＯＲＹ］

ＲＥＣＡＬＬ

ＳＡＶＥ

ＤＥＬＥＴＥＩＮＩＴＩ．

▲

２０．０ＣＵＴ００１

ＣＯＭ

ＴＵＢＥ３．２ｍｍ

ＡＵＴＯＳＴＤＳＴＤ００２

▲

２０．０ＣＵＴ００１

ＣＯＭ

－ＣＯＰＩＥＤ－

Summary of Contents for MAX LM-550A/PC A11






































































Search results

Summary of Contents for MAX LM-550A/PC A11

Reviews:

Brands by name

Popular brands

Letatwin MAX LM-550A/PC A11, Instruction Manual

Search results

Summary of Contents for MAX LM-550A/PC A11

Reviews:

Brands by name

Popular brands