3
Commissioning
DYNEO
®
Synchronous motors with permanent magnets-drive
4474 en - 2011.04 / e
LEROY-SOMER
CONTENTS
1 - COMMISSIONING OF LSRPM MAGNETS MOTOR WITH FEEDBACK VIA ENCODER WITH
COMMUTATION CHANNELS OR HALL EFFECT SENSOR, CONTROLLED BY A POWERDRIVE
DRIVE .......................................................................................................................................................4
1.1 - Connecting the sensor on the motor end (standard) ...................................................................4
1.2 - Simplified commissioning with POWERDRIVE drive ..................................................................4
2 - COMMISSIONING OF LSRPM MAGNETS MOTOR WITH FEEDBACK VIA HALL EFFECT
SENSOR, CONTROLLED BY A UNIDRIVE SP DRIVE ...........................................................................6
3 - COMMISSIONING OF LSRPM MAGNETS MOTOR WITH FEEDBACK VIA ENCODER WITH
COMMUTATION CHANNELS, CONTROLLED BY A UNIDRIVE SP DRIVE ..........................................8
3.1 - Connecting the sensor on the motor end (standard) ...................................................................8
3.2 - Simplified commissioning with UNIDRIVE SP drive ....................................................................8
4 - COMMISSIONING FOR CONTROL OF AN LSRPM MOTOR IN «SENSORLESS» MODE
(PARAMETER 00.14) .............................................................................................................................10
5 - CONNECTIONS ................................................................................................................................11
5.1 - Motors .......................................................................................................................................11
5.2 - Hall effect sensor .......................................................................................................................11
5.3 - Incremental encoder with UVW commutation channels ............................................................12
5.4 - Forced ventilation ......................................................................................................................12
5.5 - Brake .........................................................................................................................................13
5.6 - PTC sensors ..............................................................................................................................13
