Lenze · Inverter Drive 8400 motec (PROFINET® option) · DMS 5.0 EN · 02/2019 · TD23
31
6
Commissioning
6.4
Setting the IP configuration
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
2. By double-clicking on the individual IP parameters, you can set the IP configuration for each
PROFINET node in the
Configure nodes
dialog window.
3. Click
Transferred
.
• The IP configuration is transferred to the corresponding PROFINET node.
• Changes in the IP parameters will become effective immediately.
• The IP parameters are written to codes
(subnet mask), and
(gateway address) of the Communication Unit.
By clicking the
Find device
button in the
Assign IP addresses
dialog window (see step 1), you
can check whether the configuration was transferred successfully.
4. With the
C00002 = "11: Save all parameter sets"
device command, the current IP
configuration is saved non-volatilely.