Lenze DISCO GKS Series, Operating Instructions Manual

Page: 41 / 44

Appendix 10
l
41
BA 11.5032−EN 3.0
Pos. Name
1.01 Housing
1.02 Thrust collar
1.03 Foot
1.04 Set screw
1.05 Seal−Lock hexagon nut
1.06 Dowel pin
1.07 Cheese head screw
1.08 Oil sight glass
4.00 Spindle housing assembly
4.01 Spindle housing
4.02 Housing
4.03 Spindle
4.04 Guide part
4.05 Shaft
4.06 Ball headed pin
4.08 Socket
4.09 Adapter
4.10 Small worm−geared motor
4.12 Handwheel
4.13 Rotation−direction indicator
4.14 Setting indicator
4.15 Bevel
4.16 Bevel
4.17 Worm
4.20 Deep−groove ball bearing
4.21 Socket
4.22 Flange sleeve
4.23 Shaft sealing ring
4.24 Shaft sealing ring
4.25 Seal
4.26 Seal
4.27 Sealing ring
4.28 Circlip
4.29 Locking ring
4.31 Shim ring
4.32 Seeger ring
4.33 Dowel pin
4.34 Dowel pin
4.35 Dowel pin
4.36 Dowel pin
4.37 Dowel pin
4.38 Dowel pin
4.39 Set screw
4.40 Set screw
4.41 Set screw
4.42 Conical plug
4.43 Protection cover
4.44
Hexagon head cap screw
Cheese head screw
4.45 Hexagon head cap screw
Cheese head screw
4.46 Spring washer
4.47 Cheese head screw
4.48 Circlip
4.51 Cover
4.52 Cheese head screw
Pos. Name
4.53 Spring washer
4.55 Hub
4.56 Bell housing
4.57 Handle
4.58 Hexagon head cap screw
5.00 Limit−switch assembly
5.01 Housing
5.02 Housing
5.03 Actuator
5.04 Board assembly
5.05 Plate
5.06 Microswitch
5.07 Potentiometer
5.08 Worm
5.09 Screw joint
5.10 Screw joint
5.11 Set screw
5.12 Cheese head screw
5.13 Screw
5.14 Set screw
5.15 Set screw
5.16 Adapter
5.18 Circlip
5.19 Seal
5.20 O−ring
5.21 O−ring