background image

SAFETY INFORATION AND WARNINGS: 

1.

 

Children using this product must be under the supervision of an adult at all times. 

2.

 

In the interests of safety, DO NOT use this product on public roads, near motor vehicles, uneven 
ground, swimming pools or where there is water. Do not let children ride in the street, anywhere 
dangerous including slopes with more than 10 degrees, next to bodies of water and away from 
other obstacles. Use during day light hours or in an illuminated area is advised to avoid accidents 
in the dark. 

3.

 

Do not drive on long or wet grass, mud, soft ground, gravel or sand. 

4.

 

Do not drive near anything flammable or explosive. Keep any hazardous chemicals out if the 
drivers reach. 

5.

 

Suitable for children aged 3+ years old. It is recommended that children always wear shoes and 
other protective clothing and equipment (eg: helmet, gloves, kneepads etc.) during use. 

6.

 

This car must only be used by a single child, maximum load is 23 kg.  

This is advisable to avoid damage to the motor, gears and to prohibit overloading. 

7.

 

When the bike is running, do not place anything on the moving parts such as the motor, gear 
box, wheels or steering wheel. 

8.

 

Please keep the product and all parts away from children before full assembly has been 
completed by a responsible adult. 

9.

 

These instructions contain important information, please retain them after product assembly. 

10.

 

Assembly of the car must be completed by an adult. 

11.

 

To avoid suffocation or choking, keep all bags and small parts away from babies and children. 

MAINTENCE AND TROUBLE SHOOTING: 

 

Factors which may influence the motor tricycles performance and life span: 
- How flat the driving surface is 
- The weight of the driver 
- Whether the battery has been fully charged 
- Whether the motor tricycle is regularly used 
- Whether water or any other liquid has eroded the electrical 
Components 
 
CLEANING: 
Clean the motor tricycle with a soft dry cloth. Do not use any 
wax or spray liquids for cleaning. It could erode the power switch. 
 
STORAGE: 
Do not store the motor tricycle in an area of high temperature, humidity or near flames. When 
raining or snowing, keep the bike under cover and out of the weather. 
Do not change the batteries setting, as it can cause fire and damage the electrical circuit system. Do 
not change the bikes electrical circuit system. Any repairs done to this unit must be carried out by 
authorised and qualified service personnel. 
Do not allow children to charge the bike, play with the battery or motor. 
If the bike will not be used for a long period of time (3 months or longer), it is advised that you fully 
charge the battery and disconnect it from the connections. 
A long period of non use will damage the battery. It is advised that the battery should be charged 
once a month, even if the bike is not being used. 
A new battery must be fully charged before its first use. 

Summary of Contents for FORD RANGER












Reviews: