6.
Connect the two coloured wires from the steering wheel to the corresponding two
coloured wires coming from the steering hole on the body of the bike.
ADD THE PEDAL:
1.
Clip the foot pedal to the underside of the bike.
2.
Connect the wire from the foot pedal to the wire from the underside of the bike, when the
bike will be used in ride on mode. If the bike is going to be used as a stroller with the handle,
do not connect the wires from the pedal to the wire from the under side of the bike. The
child then will not be able to operate the bike with the foot pedal accidently while it has the
handle attached for parental control.
3.
Secure the foot pedal to the underside of the car using the included screws.
4.
To remove the foot pedal from the bike (eg: if the bike will be used as a walker), remove the
screws and dis-connect the wires from the pedal and the underside of the bike.
Unclip the pedal from the underside of the bike.
