Please take care with the battery as it contains acid electrolyte. Handling of the battery by adults
only.
If the battery has leaked, do not touch the acid. Place the battery into a polybag and dispose of it.
If the electrolyte splashes on your skin or into your eyes, immediately wash with water for at least
15 minutes and consult your doctor.
Do not contact the batteries two terminals with any other metal objects.
It will cause short circuiting, damage or fire.
Never push or pull the bike backward when it is running.
Do not plug the charger into any non-working or faulty wall socket. Thiscould cause short circuiting
or fire.
BEFORE USE:
CONNECTING THE BATTERY:
The battery for this bike is located under the seat. To access the battery, remove the battery cover.
Ensure that the battery is connected up properly with the black lead on black battery terminal and
the red lead on the red battery terminal.
If the battery was not connected up properly you will need to connect it and then recharge the bike
again.
Also, after charging ensure the charger is not connected when you go to drive the bike.
Ensure the bike is in forwards mode or backwards mode and then push on the foot pedal to drive it.
CHARGING THE BIKE:
The bike must be charged prior to it’s first use.
The charging port is located under the seat of the bike.
Ensure the battery is connected correctly before charging. If the battery is not connected and you
charge the bike, the battery will not be charging. Once the battery is connected correctly, connect
the charger to the charging port and the other end of the charger into an earthed power point.
The forward/reverse switch must not be on either mode when charging.
The charging time is 8 – 12 hours. The first hour of charging can get back 60% of the batteries energy
back. You may leave it to charge overnight, but NEVER continuously over 20 hours. Otherwise you
will shorten the batteries life.
Please note, the motor tricycle cannot be driven when charging.
Do not insert any metal pieces into the charging hole as to avoid short
circuiting and any damage to the electro circuit.
This vehicle has a function of charging protection and while it is being charged, other functions can
not be used.
