manualshive.com logo in svg

Lenovo Z series, Hardware Maintenance Manual, Page: 27 / 121

Share
Download
Lenovo Z series Hardware Maintenance Manual Download Page 27

23

Related service information

Related service information

This chapter presents the following information:

•

  “Restoring the factory contents by using OneKey Recovery” on page 23

•

  “Passwords” on page 24

•

  “Power management” on page 25

Restoring the factory contents by using OneKey Recovery

Restore of factory default

The Lenovo Z/P Series computers come with pre-installed OneKey Recovery 

System.In order to save application files and the initial backed up files of the 

system, the hard disk in a Lenovo computer includes a hidden partition when 

it is shipped. If you need to restore the system to the point of your first boot 

up, just enter Lenovo OneKey Recovery System and run 

System Recovery

. 

For details of OneKey Recovery System, see 

the User Guide for Lenovo OneKey 

Recovery system

.

Note:

 This will delete all the new data on the system partition (C drive), which 

is not recoverable. Make sure to back up your critical data before you perform this 

action.

Summary of Contents for Z series


























































































































Reviews:

No comments