Visual indicators
LEDs on ThinkSystem 4350 Series adapters provide a visual indication for the board hardware status. The
LED locations vary, and may be on the front of the board or back of the board (see Figure 1 “ThinkSystem
4350 Series LED locations” on page 4), and include DDR LEDs (also referred to as Flash-Based Write Cache,
or FBWC, LEDs) and status LEDs. The LED states are described in Table 2 “ThinkSystem 4350 Series Status
LEDs” on page 4.
Front panel brackets have three holes for the Heartbeat LED, Fault LED, and Crypto LED.
Figure 1. ThinkSystem 4350 Series LED locations
ThinkSystem 4350–8i (on the front of board)
ThinkSystem 4350–16i (on the back of board)
Table 2. ThinkSystem 4350 Series Status LEDs
LED
Color
Function
HEARTBEAT (DS5)
Green
Heartbeat (blinks once per/second when firmware is
operating normally)
FAULT (DS7)
Orange (8i adapters)
Yellow (16i adapters)
Hardware Lockup/Fault
CRYPTO (DS1)
Green
Cryptographic State: always off
ThinkSystem 4350 Series adapters do not support
controller-side encryption.
4
ThinkSystem 4350/5350/9350 Series Adapters Installation and User Guide
Summary of Contents for ThinkSystem 4350 Series
