1
Mounting bracket
4
4 internal mini-SAS HD connectors (CN0–CN3)
2
UART
5
PCIe x8 connector
3
Super capacitor connector
6
HDA mode jumper
Note:
The HDA mode jumper is only for debug purposes. It disables the firmware on the controller so that
special tools can be used to remove the controller. These are only provided at the explicit direction of
support.
Table 12. ThinkSystem RAID 9350–16i specifications
Form factor
Low-profile MD2
Bus compatibility
PCIe 3.0
PCIe bus width
x8
Data transfer rate
12 Gb/s per port
Phys (Unified Serial Ports)
16
Standard memory
32 MB boot flash, 128 Kb SEEPROM, 128 Kb MRAM
Cache
4 GB
Connectors, internal
4 mini-SAS HD x4
Maximum number of disk drivers
16 direct-attached (or up to 238 with expanders)
Controller-side encryption
No
Thermal sensor
Processor temperature, ambient temperature
Cache Protection/Backup
Integrated SC57A92547 backup module with filler and external super capacitor
15
Summary of Contents for ThinkSystem 4350 Series
