Lenovo ThinkSystem 4350 Series, Installation And User Manual

Page: 10 / 38

Table 3. ThinkSystem 4350–8i specifications
Form factor PCIe Low-profile MD2
Bus compatibility
PCIe 3.0
PCIe bus width x8
Data transfer rate 12 Gb/s per port
Phys (Unified Serial Ports) 8
Standard memory 32 MB boot flash, 256 KB SEEPROM, 128 KB MRAM
Connectors, internal 1x2 mini-SAS HD x8
Maximum number of disk drivers 8 direct-attached (or up to 256 with expanders)
Thermal sensor
Inlet ambient temperature, ASIC die temperature, Top-side board ambient
temperature, Bottom-side board ambient temperature
About ThinkSystem 4350–16i
The ThinkSystem 4350–16i is a SAS Host Bus Adapter with these features:
Figure 3. ThinkSystem 4350–16i
1
Mounting bracket
4
PCIe x8 connector
2
UART
5
HDA mode jumper
3
4 internal mini-SAS HD connectors (CN0–CN3)
Note: The HDA mode jumper is only for debug purposes. It disables the firmware on the controller so that
special tools can be used to remove the controller. These are only provided at the explicit direction of
support.
6
ThinkSystem 4350/5350/9350 Series Adapters Installation and User Guide