Lenovo THINKSERVER 3729 Hardware Maintenance Manual Download Page 48

Page: 48 / 266

Performing the checkout procedure

To perform the checkout procedure, complete the following steps:

1. Is the server part of a cluster?

No:

Go to step 2.

Yes:

Shut down all failing servers that are related to the cluster. Go to step 2.

2. Complete the following steps:

a. Check the power supply LEDs, see “Power-supply LEDs” on page 50.

b. Turn off the server and all external devices.

c. Check all internal and external devices for compatibility at

http://www.ibm.com/servers/eserver/serverproven/compat/us/.

d. Make sure the server is cabled correctly.

e. Check all cables and power cords.

f. Set all display controls to the middle positions.

g. Turn on all external devices.

h. Turn on the server.

i. Check the system-error LED on the operator information panel. If it is

flashing, check the light path diagnostics LEDs.

j. Check for the following results:

Successful completion of POST (see “POST” on page 29 for more
information).

Successful completion of startup, which is indicated by a readable display
of the operating-system desktop.

ThinkServer RD220 Types 3729, 3779, 3797, and 3798: Hardware Maintenance Manual

Summary of Contents for THINKSERVER 3729











































































































































































































































































Search results

Summary of Contents for THINKSERVER 3729

Reviews:

Related manuals for THINKSERVER 3729

Brands by name

Popular brands

Lenovo THINKSERVER 3729, Hardware Maintenance Manual

Search results

Summary of Contents for THINKSERVER 3729

Reviews:

Related manuals for THINKSERVER 3729

Brands by name

Popular brands