manualshive.com logo in svg

Lenovo ThinkCentre M900z 10F2, Hardware Maintenance Manual, Page: 82 / 146

Share
Download
Lenovo ThinkCentre M900z 10F2 Hardware Maintenance Manual Download Page 82

Ethernet LAN problems

My computer cannot be connected to an Ethernet LAN

Solutions:

• Connect the cable from the Ethernet connector to the RJ45 connector of the hub.

• Enable the Ethernet LAN feature in the Setup Utility program. See “Starting the Setup Utility program” on

page 63. Then, follow the instructions on the screen.

• Enable the Ethernet LAN adapter.

1. Depending on your Windows version, do one of the following:

– For Windows 7: Click the Start button to open the Start menu.

– For Windows 10: Right-click the Start button to open the Start context menu.

2. Click

Control Panel

. View Control Panel using Large icons or Small icons, and then click

Network

and Sharing Center

➙

Change adapter settings

.

3. Right-click the Ethernet LAN adapter icon and click

Enable

.

• Update or reinstall the Ethernet LAN driver. See “Keeping your computer current” on page 56.

• Install all networking software that is necessary for your network environment. Check with your LAN

administrator for the necessary networking software.

• Set the same duplex for the switch port and the adapter. If you configured the adapter for full duplex,

ensure that the switch port is also configured for full duplex. Setting the wrong duplex mode might
degrade performance, cause data loss, or result in lost connections.

My computer is a Gigabit Ethernet model and I use a speed of 1000 Mbps, but the connection fails
or errors occur

Solution: Connect the network cable to the Ethernet connector using Category 5 wiring and a 100 BASE-T
hub/switch (not 100 BASE-X).

My computer is a Gigabit Ethernet model, but it cannot be connected to the network at 1000 Mbps,
but at only 100 Mbps

Solutions:

• Try another cable.

• Set the link partner to auto-negotiate.

• Set the switch to be 802.3ab-compliant (gigabit over copper).

The Wake On LAN feature does not work

Solution: Enable the Wake On LAN (WOL) feature in the Setup Utility program. See “Starting the Setup Utility
program” on page 63. Then, follow the instructions on the screen.

Wireless LAN problem

Note:

The wireless LAN feature is supported only on some models.

The wireless LAN feature does not work

Solutions:

• Enable the wireless LAN feature in the Setup Utility program. See “Starting the Setup Utility program” on

page 63. Then, follow the instructions on the screen.

• For Windows 10, enable the wireless LAN feature in Windows Settings. Click the Start button to open the

Start menu, and then click

Settings

➙

Network & Internet

➙

Wi-Fi

. Turn on the Wi-Fi feature.

• Enable the wireless LAN adapter.

74

ThinkCentre M900z Hardware Maintenance Manual

Summary of Contents for ThinkCentre M900z 10F2



















































































































































Reviews:

No comments