Lenovo ThinkCentre M70t Hardware Maintenance Manual Download Page 58

Page: 58 / 110

Open the Vantage app to check the available update packages. If the latest UEFI BIOS update package is
available, follow the on-screen instructions to download and install the package.

• From the Lenovo Support Web site:

Go to

https://pcsupport.lenovo.com

and select the entry for your computer. Then, follow the on-screen

instructions to download and install necessary drivers and software.

• From Windows Update:

Note:

The device drivers provided by Windows Update might not be tested by Lenovo. It is

recommended that you get device drivers from Lenovo.

1. Open the

Start

menu.

2. Click

Settings

➙

Update & Security

➙

Windows Update

3. Follow the on-screen instructions.

M70t and M80t Hardware Maintenance Manual

Summary of Contents for ThinkCentre M70t















































































































Search results

Summary of Contents for ThinkCentre M70t

Reviews:

Related manuals for ThinkCentre M70t

Brands by name

Popular brands

Lenovo ThinkCentre M70t, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M70t

Reviews:

Related manuals for ThinkCentre M70t

Brands by name

Popular brands