Lenovo ThinkCentre M32 User Manual Download Page 73

Page: 73 / 98

Chapter 10. Getting information, help, and service

This chapter contains information about help, service, and technical assistance for products manufactured
by Lenovo.

Information resources

You can use the information in this section to access useful resources relating to your computing needs.

Safety and Warranty

The

Safety, Warranty, and Setup Guide

that is provided with your computer contains information on safety,

setup, warranty, and notices. Read and understand all safety information before using this product.

Lenovo Web site

The Lenovo Web site (http://www.lenovo.com) provides up-to-date information and services to help you buy,
upgrade, and maintain your computer. You can also do the following:

• Shop for desktop and notebook computers, monitors, projectors, upgrades and accessories for your

computer, and special offers.

• Purchase additional services, such as support for hardware, operating systems, application programs,

network setup and configuration, and custom installations.

• Purchase upgrades and extended hardware repair services.

• Download the latest device drivers and software updates for your computer model.

• Access the online manuals for your products.

• Access the Lenovo Limited Warranty.

• Access troubleshooting and support information for your computer model and other supported products.

• Find the service and support phone numbers for your country or region.

• Find a Service Provider located near you.

Lenovo Support Web site

Technical support information is available on the Lenovo Support Web site at:
http://www.lenovo.com/support

This Web site is updated with the latest support information such as the following:

• Drivers and software

• Diagnostic solutions

• Product and service warranty

• Product and parts details

• User guides and manuals

• Knowledge base and frequently asked questions

Help and service

This section contains information about obtaining help and service.

Summary of Contents for ThinkCentre M32

































































































Search results

Summary of Contents for ThinkCentre M32

Reviews:

Lenovo ThinkCentre M32, User Manual, Page: 73 / 98

Search results

Summary of Contents for ThinkCentre M32

Reviews: