Lenovo ThinkCentre M32 User Manual Download Page 16

Page: 16 / 98

Connector

Description

PS/2 mouse connector

Used to attach a mouse, a trackball, or other pointing devices that use a PS/2
mouse connector.

Parallel connector

Used to attach a parallel printer or other devices that use a 25-pin parallel connector.

Serial connector

Used to attach an external modem, a serial printer, or other devices that use a
9-pin serial connector.

USB 2.0 connector

Used to attach a device that requires a USB 2.0 connection, such as a keyboard, a
mouse, a scanner, a printer, or a personal digital assistant (PDA).

VGA monitor connector

Used to attach a VGA monitor or other devices that use a VGA monitor connector.

Note:

The VGA monitor connector is not applicable on some models. If your

computer has a graphics card installed, ensure that you use a monitor connector on
the graphics card.

ThinkCentre M32 User Guide

Summary of Contents for ThinkCentre M32

































































































Search results

Summary of Contents for ThinkCentre M32

Reviews:

Lenovo ThinkCentre M32, User Manual, Page: 16 / 98

Search results

Summary of Contents for ThinkCentre M32

Reviews: