Lenovo IdeaPad U310 Hardware Maintenance Manual Download Page 50

Page: 50 / 115

Lenovo IdeaPad U310/U410 U310/U410 Touch Hardware
Maintenance Manual

1030 Hard disk drive

For access, remove this FRU:
• “1010 Battery pack” on page 34

Figure 3. Removal steps of hard disk drive

U310/U310 Touch:

Remove the frame fixing screws

. Pull the tab in the

direction shown by arrow

Step

Screw (quantity)

Color

Torque

M2.5 × 3.5 mm, flat-head, nylok-coated
(4)

Silver

2.5 kgfcm

Attention:

•

Do not drop the hard disk drive or apply any physical shock to it.

The hard disk drive is sensitive to physical shock. Improper handling
can cause damages and permanent loss of data.

• Before removing the drive, suggest the customer to backup all the

information on it if possible.

• Never remove the drive while the system is operating or is in suspend

mode.

Summary of Contents for IdeaPad U310




















































































































Search results

Summary of Contents for IdeaPad U310

Reviews:

Related manuals for IdeaPad U310

Brands by name

Popular brands

Lenovo IdeaPad U310, Hardware Maintenance Manual

Search results

Summary of Contents for IdeaPad U310

Reviews:

Related manuals for IdeaPad U310

Brands by name

Popular brands