Lenovo IdeaPad U310/U410 U310/U410 Touch
37
Figure 1. Removal steps of battery pack (continued)
The illustration below is the design sketch of Area B.
Note:
1. The yellow rectangles 1 and 2 below show rubber protrusions. Absorber
should not cover these.
2. Arched line 3, absorber should be cut along the arched line, against the black
mylar alignment. It must not overlap, so it does not interfere with fan.
Area C: Take a stepped-shaped absorber (100mm wide x 32mm high), and apply
it to the machine from the blue baselines (either arrow 1 or arrow 2) pointed to
by the blue arrow in the illustration below. When the starting positions are fixed,
press the absorber to make it flat.
The illustration below is the design sketch of Area C.
Note:
If attaching starting from blue arrow 1, take care that the absorber does not
overlap in the area indicated by the red oval. Take care that the absorber does not
extend past the area indicated by the yellow line below, otherwise it will
interfere with the fan.
Area B
Area B