Lenovo IdeaPad U310 Hardware Maintenance Manual Download Page 34

Page: 34 / 115

Lenovo IdeaPad U310/U410 U310/U410 Touch Hardware
Maintenance Manual

Table 2. Status indicators

Indicator

Meaning

Power on

On (solid white):

The computer is powered on.

Blinking:

The computer is in sleep mode.

off:

The computer is powered off.

Battery

On (solid white):

The battery has more than 20% charge.

Solid amber:

The battery has between 5% and 20% charge.

Fast blinking amber:

The battery has less than 5% charge.

Slow blinking amber:

The battery is being charged. When battery charge
reaches 20%, the blinking color changes to white.

Slow blinking white:

The battery has between 20% and 80% charge and is
still charging. When the battery reaches 80% charge
the light will stop blinking, but charging will
continue until the battery is fully charged.

Off:

The battery is detached.

Summary of Contents for IdeaPad U310




















































































































Search results

Summary of Contents for IdeaPad U310

Reviews:

Related manuals for IdeaPad U310

Brands by name

Popular brands

Lenovo IdeaPad U310, Hardware Maintenance Manual

Search results

Summary of Contents for IdeaPad U310

Reviews:

Related manuals for IdeaPad U310

Brands by name

Popular brands