Lenovo IdeaPad U310 Hardware Maintenance Manual Download Page 35

Page: 35 / 115

Lenovo IdeaPad U310/U410 U310/U410 Touch

The following table shows the function of each combination of Fn with a function
key.

Table 3. Fn key combinations

The hotkeys are located in the function key row of the keyboard. By pressing the
appropriate hotkey, you can change system settings instantly.

The following describes the function of each hotkey.

Table 4. Hotkeys

Key combination

Description

Fn + Home:

Activate the pause function.

Fn + End:

Activate the break function.

Fn + PgUp:

Enable/Disable the scroll lock.

Fn + PgDn:

Activate the insert function.

Hotkeys

Description

Mute/Unmute.

Decrease sound volume.

Increase sound volume.

Close active window or program.

Refresh desktop or Web pages.

Enable/Disable the touchpad.

Open the interface for integrated wireless devices
settings (on/off).

Enable/Disable the built-in microphone.

Turn on/off the integrated camera.

Open the interface for changing display devices.

Decrease display brightness.

Increase display brightness.

Fn key combinations

Hotkeys

Summary of Contents for IdeaPad U310




















































































































Search results

Summary of Contents for IdeaPad U310

Reviews:

Related manuals for IdeaPad U310

Brands by name

Popular brands

Lenovo IdeaPad U310, Hardware Maintenance Manual

Search results

Summary of Contents for IdeaPad U310

Reviews:

Related manuals for IdeaPad U310

Brands by name

Popular brands