Lenovo IdeaCentre K4 Series User Manual Download Page 69 | Manualshive

Page: 69 / 69

background image

64

User Guide

To awaken your computer from a Sleep or System Standby mode, press any
key on your keyboard. For more information about these settings, refer to your
Windows Help and Support information system.

Enabling ErP compliance mode

You can enable the energy-related products directive (ErP) compliance mode
through the

Power

menu in the Setup Utility program. This mode reduces

electricity consumption when your computer is in standby mode or turned off.
To enable ErP compliance mode in the Setup Utility program, do the following:
1. Repeatedly press and release the F1 key when turning on the computer to start

the Setup Utility program.

2. From the Setup Utility program main menu, select

Power

→

ErP

and press

Enter.

3. Select

Enabled

and press Enter.

4. Press F10 to save changes and exit the Setup Utility program. Press Enter

when prompted to confirm.

Note

: When ErP compliance mode is enabled, you only can wake up your

computer by pressing the power switch.

«
...
67
68
69

Summary of Contents for IdeaCentre K4 Series






































































Reviews:

No comments

Related manuals for IdeaCentre K4 Series

Brand: Panasonic Pages: 12

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 43

Brand: IBASE Technology Pages: 80

Brand: Gateway Pages: 144

Brand: AXIOMTEK Pages: 64

Brand: WAGO Pages: 52

Brand: Apricot Pages: 139

Brand: HP Pages: 66

Brand: HP Pages: 28

Brand: Siemens Nixdorf Pages: 26

Brand: RKM Pages: 33

Brand: Moxa Technologies Pages: 47

Brand: Moxa Technologies Pages: 57

Brand: Ergotron Pages: 22

Brand: FabiaTech Pages: 5

Brand: Partner Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands