Lenovo DM120S Installation And Cabling Manual Download Page 42 | Manualshive

Page: 42 / 70

Lenovo DM120S Installation And Cabling Manual Download Page 42

Controller A and C port connection rules (for non DM3000x, DM5000x, or DM7000x configurations)

• A and C ports are always the primary paths to a stack.

• A and C ports always connect to the logical first disk shelf in a stack.

• A and C ports always connect to disk shelf IOM ports 1 and 2. IOM port 2 is only used for quad-path HA

and quad-path configurations.

• Controller 1 A and C ports always connect to IOM A (domain A).

• Controller 2 A and C ports always connect to IOM B (domain B).

The following illustration highlights how controller ports A and C connect in a multipath HA configuration with
one quad-port HBA and two stacks of disk shelves. Connections to stack 1 are shown in blue. Connections
to stack 2 are shown in orange.

Controller B and D port connection rules (for non DM3000x, DM5000x, or DM7000x configurations)

• B and D ports are always the secondary paths to a stack.

• B and D ports always connect to the logical last disk shelf in a stack.

• B and D ports always connect to disk shelf IOM ports 3 and 4.IOM port 4 is only used for quad-path HA

and quad-path configurations.

• Controller 1 B and D ports always connect to IOM B (domain B).

• Controller 2 B and D ports always connect to IOM A (domain A).

• B and D ports are connected to the stacks by offsetting the order of the PCI slots by one so that the first

port on the first slot is cabled last.

38

Installation and Cabling Guide for DM120S, DM240S, and DM600S

«
...
40
41
42
43
44
...
»

Summary of Contents for DM120S







































































Reviews:

No comments