manualshive.com logo in svg

Lenovo DM120S, Installation And Cabling Manual, Page: 36 / 70

Share
Download
Lenovo DM120S Installation And Cabling Manual Download Page 36

•  The cabling example visually distinguishes the two sets of multipathed cabling needed to achieve quad- 

pathed connectivity for each controller to each stack in an HA pair configuration. The first set of 
multipathed cabling is referred to as “multipathed”. The second set of multipathed cabling is referred to as 
“quad-pathed”. The second set of cabling is referred to as “quad-pathed” because completing this set of 
cabling gives you the quad-pathed connectivity.

•  The worksheet example shows port pairs designated for multipathed cabling or quad-pathed cabling to 

the applicable stack. Each port pair designated for multipathed cabling is encircled by an oval that is the 
color associated with the stack it is cabled to. Each port pair designated for quad-pathed cabling is 
encircled by a rectangle that is the color associated with the stack it is cabled to.

32

Installation and Cabling Guide for DM120S, DM240S, and DM600S

Summary of Contents for DM120S







































































Reviews:

No comments