Lenovo Aptiva Hardware Maintenance Manual Download Page 387

Page: 387 / 464

POST Error Code

FRU/Action

262
POST detected a base
memory or extended
memory type error.

1. Run Setup. Check

System Summary
menu for memory
type change. (See
“Setup Utility
program” on
page 339.)

2. Run the Extended

Memory Diagnostic
tests.

301

1. Keyboard
2. Keyboard Cable
3. System Board

303
With an 8603 error.

1. Mouse
2. Keyboard
3. Keyboard Cable
4. System Board

303
With no 8603 error.

1. Keyboard
2. Keyboard Cable
3. System Board

3XX
Not listed above.

1. Keyboard
2. Keyboard Cable
3. System Board

5XX

1. Video Adapter

(if installed)

2. System Board

601

1. Diskette Drive A
2. Diskette Drive Cable

3. System Board

602

1. Bad Diskette

2. Verify Diskette and

retry.

3. Diskette Drive

4. Diskette Drive Cable

5. System Board

604
And able to run diagnostics.

1. Run Setup and verify

diskette configuration
settings

2. Diskette Drive A/B
3. Diskette Drive Cable

4. System Board

605
POST cannot unlock the
diskette drive.

1. Diskette Drive

2. Diskette Drive Cable

3. System Board

662

1. Diskette drive

configuration error or
wrong diskette drive
type, run Setup
Configuration.

6XX
Not listed above.

1. Diskette Drive
2. System Board

3. External Drive Adapter
4. Diskette Drive Cable

5. Power Supply

IntelliStation

6868/6878

377

Summary of Contents for Aptiva

















































































































































































































































































































































































































































































Search results

Summary of Contents for Aptiva

Reviews:

Lenovo Aptiva, Hardware Maintenance Manual, Page: 387 / 464

Search results

Summary of Contents for Aptiva

Reviews: