Lenovo Aptiva Hardware Maintenance Manual Download Page 183

Page: 183 / 464

ZIP drive removal

Hard drive removal

Tabs

Hard Drive

Bracket

To remove the hard drive:

1. Press in on both rail tabs and lift the hard drive up

then pull it back and out from the bracket.

2. Remove the signal and power cables from top of the

hard drive.

3. When replacing the hard drive, remove the drive rails

from the old drive and install them on the new drive.

PC 300 - 6563/6593/6564/6574 Aptiva - 2178/2198

173

Summary of Contents for Aptiva

















































































































































































































































































































































































































































































Search results

Summary of Contents for Aptiva

Reviews:

Related manuals for Aptiva

Brands by name

Popular brands

Lenovo Aptiva, Hardware Maintenance Manual

Search results

Summary of Contents for Aptiva

Reviews:

Related manuals for Aptiva

Brands by name

Popular brands