Lenovo Aptiva Hardware Maintenance Manual Download Page 110

Page: 110 / 464

Message/Symptom

FRU/Action

“Insert a Diskette” icon
appears with a known-good
diagnostics diskette in the
first 3.5-inch diskette drive.

1. Diskette Drive
2. System Board

3. Diskette Drive Cable

4. Network Adapter

Intensity or color varies from
left to right of characters
and color bars.

1. Display
2. System Board

No power, or fan not
running.

1. See “Power supply”

on page 29.

Nonsystem disk or disk
error-type message
with a known-good
diagnostic diskette.

1. Diskette Drive
2. System Board

3. Diskette Drive Cable

Other display symptoms not
listed above (including blank
or illegible display).

1. See “Display” on

page 31.

2. System Board
3. Display

Power-on indicator or hard
disk drive in-use light
not on, but computer
works correctly.

1. Power Supply
2. System Board
3. LED Cables

Printer problems.

1. See “Printer” on

page 28.

Program loads from the
hard disk with a
known-good diagnostics
diskette in the first 3.5-inch
diskette drive.

1. Run Setup
2. Diskette Drive

3. Diskette Drive Cable

4. System Board
5. Power Supply

RPL computer cannot
access programs from its
own hard disk.

1. If network admin. is

using LCCM Hybrid
RPL, check startup
sequence: First
device: network;
Second device: hard
disk

2. Hard disk drive

RPL computer does not
RPL from server.

1. Check startup

sequence

2. Check the network

adapter LED status

Serial or parallel port device
failure (system board port).

1. External Device

Self-Test OK?

2. External Device
3. Cable
4. System Board

Serial or parallel port device
failure (adapter port).

1. External Device

Self-Test OK?

2. External Device
3. Cable
4. Alternate Adapter
5. System Board

100

IBM PC 300/IntelliStation/Aptiva Vol 2 HMM

Summary of Contents for Aptiva

















































































































































































































































































































































































































































































Search results

Summary of Contents for Aptiva

Reviews:

Related manuals for Aptiva

Brands by name

Popular brands

Lenovo Aptiva, Hardware Maintenance Manual

Search results

Summary of Contents for Aptiva

Reviews:

Related manuals for Aptiva

Brands by name

Popular brands