Lenovo Aptiva Hardware Maintenance Manual Download Page 194

Page: 194 / 464

POST Error Code

FRU/Action

162
Configuration mismatch.

1. Run Setup and verify

Configuration

2. Had a device been

added, removed,
changed location? If
not, suspect that
device.

3. Power-on external

devices first, then
power-on computer.

4. CMOS Backup Battery

(See page “Safety
information” on
page 434.)

5. System Board

162
And unable to run
diagnostics.

1. Diskette Drive
2. System Board

3. Diskette Drive Cable

163
Clock not updating or invalid
time set.

1. Time and Date Set?
2. CMOS Backup Battery

(See page “Safety
information” on
page 434.)

3. System Board

164
POST detected a base
memory or extended
memory size mismatch
error.

1. Run Setup. Check

System Summary
menu for memory
size change. (See
“Setup Utility
program” on
page 141.)

2. Run the Extended

Memory Diagnostic
tests.

166
Boot Block Check Sum
Error

1. Run Flash Recovery

using Boot Block.
See “Flash recovery
boot block” on
page 154

2. System Board

167
Microprocessor installed
that is not supported
by the current POST/BIOS.

1. Run Setup. Check

Stepping level for the
BIOS level needed,
then perform the
flash update.

2. Processor

168
Alert on LAN error

1. Run Setup. Check to

see that Ethernet and
Alert on LAN are
enabled.

2. System Board

17X, 18X

1. C2 Security

184

IBM PC 300/IntelliStation/Aptiva Vol 2 HMM

Summary of Contents for Aptiva

















































































































































































































































































































































































































































































Search results

Summary of Contents for Aptiva

Reviews:

Related manuals for Aptiva

Brands by name

Popular brands

Lenovo Aptiva, Hardware Maintenance Manual

Search results

Summary of Contents for Aptiva

Reviews:

Related manuals for Aptiva

Brands by name

Popular brands