Lenovo 7515-J9U - ThinkCentre A58 Desktop PC User Manual Download Page 24

Page: 24 / 92

Removing and reinstalling the front bezel

This section provides instructions on how to remove and reinstall the front bezel.

To remove and reinstall the front bezel:

Remove the computer cover. See “Removing the computer cover” on page 14.

Release the three plastic tabs on the left side and pivot the front bezel outward
to remove it.

To reinstall the front bezel, align the plastic tabs on the right side of the front
bezel with the corresponding holes in the chassis, then pivot the front bezel
inward until it snaps into position on the left side.

To complete the installation, go to “Completing the parts replacement” on page
46.

Figure 6. Removing the front bezel

User Guide

Summary of Contents for 7515-J9U - ThinkCentre A58 Desktop PC





























































































Search results

Summary of Contents for 7515-J9U - ThinkCentre A58 Desktop PC

Reviews:

Related manuals for 7515-J9U - ThinkCentre A58 Desktop PC

Brands by name

Popular brands

Lenovo 7515-J9U - ThinkCentre A58 Desktop PC, User Manual

Search results

Summary of Contents for 7515-J9U - ThinkCentre A58 Desktop PC

Reviews:

Related manuals for 7515-J9U - ThinkCentre A58 Desktop PC

Brands by name

Popular brands