Lenovo 70F0 User Manual And Hardware Maintenance Manual Download Page 42

Page: 42 / 96

13. Browse to the *_istr_*.bin file, and then click

Send

. The file transfer starts.

14. When the transfer progress is completed, enter

. The firmware update operation is completed.

Note:

If your storage array has two rear I/O modules installed, the two modules must have the same firmware

version. Repeat the previous procedure to update the firmware of the secondary rear I/O module.

Using the ThinkServer Storage Array Utility program

The ThinkServer Storage Array Utility program enables you to maintain your storage array firmware
up-to-date and helps you avoid unnecessary outages.

To update your storage array firmware using ThinkServer Storage Array Utility, do the following:

1. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to locate ThinkServer

Storage Array Utility.

2. Download the EXE file for ThinkServer Storage Array Utility and the TXT file that contains the installation

instructions.

3. Follow the instructions on the TXT file to install ThinkServer Storage Array Utility on the server that

your storage arrays are connected to. Then, use ThinkServer Storage Array Utility to update the
firmware of your storage arrays. For detailed information about using the program, refer to the user
guide of the program.

ThinkServer Storage SA120 User Guide and Hardware Maintenance Manual

Summary of Contents for 70F0

































































































Search results

Summary of Contents for 70F0

Reviews:

Related manuals for 70F0

Brands by name

Popular brands

Lenovo 70F0, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for 70F0

Reviews:

Related manuals for 70F0

Brands by name

Popular brands