Installing the device driver in Windows XP
To install the device driver in Microsoft® Windows XP, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play
feature in XP.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows XP operating system.
4. Open the Display Properties window by clicking Start, Settings, Control Panel and
then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Hardware Update Wizard window by clicking on Update Driver and then
click the Next button.
11. Select “Install from a list or Specific location (Advanced)” and then click the Next
button. 12. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk
button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the “DRIVERS” folder.
15. Select E75 monitor and click OK. The files will be copied from the CD to your hard
disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
18
Summary of Contents for 6307BTN - E75 - 17" CRT Display
Page 1: ...E75 Color Monitor ...
Page 2: ......
