Power Source:
1. Make sure the power cord is the correct type that is required in your area.
2. This monitor has a universal power supply that allows operation in100/120V ac or
220/240V ac voltage (No user adjustment is required)
3. Connect the power cord into your monitor’s power input socket, and then plug the other
end into a 3-pin ac power outlet. The power cord can be connected to either a wall power
outlet or the power outlet socket on your computer, depending on the type of power cord
supplied with your monitor.
Power cord:
For safe operation, use the power cord supplied with the unit.
Video cable
Connecting the video cable:
The monitor comes with a built-in video cable. Plug the signal
cable's 15-pin connector into the computer's video port and tighten the two screws on the
cable connector. ( see figure 2)
Connecting the power cord:
Plug the power cord into the monitor's ac power socket. Then
plug the power cord into a grounded ac outlet or UL-approved power strip or the power output
socket on your computer.
Caution: If the AC outlet is not grounded (only two holes), install the proper grounding adapter (not
supplied)
1
2
Figure 2 Connecting cables
1.
Power Cord
2.
Signal Cable
9
Summary of Contents for 6307BTN - E75 - 17" CRT Display
Page 1: ...E75 Color Monitor ...
Page 2: ......
