Lenovo 46M4002 Installation And Maintenance Manual Download Page 19

Page: 19 / 86

a. Leave enough space to connect, route, and disconnect power cords.

b. If you are installing a cable-management bracket in the same side of the rack cabinet, leave enough

space between the outlet side of the PDU and the EIA mounting flanges for the cable-management
bracket installation.

Attention:

You must disconnect the main input power before you connect or disconnect the input

power cord from the PDU.

3. If the PDU comes with a detached power cord, connect the power cord. Align the connector on the

power cord that comes with the PDU with the connector on the front of the PDU, turning as necessary
for key alignment; then, turn the twist-lock on the connector clockwise until it locks into place.

Chapter 2

Installing the 1U PDU vertically in a rack cabinet

Summary of Contents for 46M4002























































































Search results

Summary of Contents for 46M4002

Reviews:

Brands by name

Popular brands

Lenovo 46M4002, Installation And Maintenance Manual

Search results

Summary of Contents for 46M4002

Reviews:

Brands by name

Popular brands