Lenovo 30141DU - IdeaCentre Q100 Mini PC, Safety And Warranty Manual

Page: 47 / 72

7
Safety and warranty guide
is possible for the disc to break apart or even shatter when the CD and DVD drives are in use. To protect against
possible injury due to this situation, and to reduce the risk of damage to your machine, do the following:
• Always store CD and DVD discs in their original packaging.
• Always store CD and DVD discs out of direct sunlight and away from direct heat sources.
• Remove CD and DVD discs from the computer when not in use.
• Do not bend or flex CD and DVD discs, or force them into the computer or their packaging.
• Check CD and DVD discs for cracks before each use. Do not use cracked or damaged discs.
Electical current safety information
Danger
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
• To prevent possible shock hazard, do not use your computer during a lightning storm.
• Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this
product during an electrical storm.
• Connect all power cords to a properly wired and grounded electrical outlet.
• Connect to properly wired outlets any equipment that will be attached to this product.
• When possible, use one hand only to connect or disconnect signal cables.
• Never turn on any equipment when there is evidence of fire, water, or structural damage.
• Disconnect the attached power cords, telecommunications systems, networks, and modems before you
open the device covers, unless instructed otherwise in the installation and configuration procedures.
• Connect and disconnect cables as described in the following table when installing, moving, or opening
covers on this product or attached devices.
To connect: To disconnect:
1. Turn everything OFF. 1. Turn everything OFF.
2. First, attach all cables to devices. 2. First, remove power cords from outlet.
3. Attach signal cables to connectors. 3. Remove signal cables from connectors.
4. Attach power cords to outlet. 4. Remove all cables from devices.
5. Turn device ON.