Replacing Memory
Chapter 5. Upgrading and Replacing Devices
49
If you want to replace a new SO-DIMM, remove the origin SO-DIMM by
releasing the two latches on both edges of the socket at the same time, pull
out the SO-DIMM from the socket, and then install the new SO-DIMM
follow the steps above.
Attention:
If only one SO-DIMM is installed, plug it into the SO-DIMM
socket which is closer to the mainboard.
To make sure that the SO-DIMM is installed correctly, do as follows:
1.
Turn the computer on.
2.
While the initial screen is displayed, press F2. The BIOS Utility screen
opens. The
Total Memory
item on the
Main
menu shows the amount of
memory you can utilize.
Lenovo 3000Y310 UG.book Page 49 Friday, September 14, 2007 4:24 PM