Lenovo 20QT Hardware Maintenance Manual Download Page 95

Page: 95 / 115

Ensure that the edges of the new LCD panel assembly align with the sponges on the computer cover.

Note:

For LCD panel with the factory color calibration feature, do the following to install new color profiles:

1. Connect your computer to the network and close the X-Rite Color Assistant program.

2. Go to

C:\Program files (x86)\X-Rite Color Assistant

and locate the

ProfileUpdaterForDisplayReplacement.exe file.

3. Double-click the EXE file. Follow the on-screen instructions to input the display serial number and click

Submit

. You can find the display serial number and instructions on a sticker fixed to the front of the new

LCD part. When the new color profiles are installed successfully, a prompted window will be displayed.

2040 Camera card

For access, remove these FRUs in order:
•  “1010 Base cover assembly” on page 63
•  “1150 LCD unit” on page 81
•  “2010 LCD-bezel frame, strip cover, and ThinkShutter ” on page 84
•  “2020 Hinges” on page 85
•  “2030 LCD panel assembly and LCD cable” on page 86

Chapter 8

Removing or replacing a FRU

Summary of Contents for 20QT




















































































































Search results

Summary of Contents for 20QT

Reviews:

Related manuals for 20QT

Brands by name

Popular brands

Lenovo 20QT, Hardware Maintenance Manual

Search results

Summary of Contents for 20QT

Reviews:

Related manuals for 20QT

Brands by name

Popular brands