Lenovo 20QT Hardware Maintenance Manual Download Page 61

Page: 61 / 115

System board and keyboard subcard connectors

No.

Connector/feature

Internal cable required

Cable connection

1 16

Thermal fan connectors (internal)

Thermal fan assembly cable

The thermal fan assembly comes
with two cables. Connect the
cables to these connectors.

LCD cable connector (internal)

LCD cable

Connect one end to the LCD panel
and the other end to this
connector.

dc-in connector

dc-in cable

Connect one end of the dc-in
cable to this connector.

USB-C connector (Thunderbolt 3
compatible)/ power connector
(external)

Connect USB-C compatible
devices or a USB-C power
adapter to this connector.

HDMI connector (external)

Connect a compatible digital audio
device or video monitor to this
connector.

Ethernet extension connector Gen
2 (external)

Connect to a local area network
(LAN) through this connector using
a ThinkPad Ethernet Extension
Adapter Gen 2.

Audio connector (external)

Connect headphones or a headset
to this connector.

Speaker connector (internal)

Speaker assembly cable

Connect the speaker assembly
cable to this connector.

Keyboard subcard cable
connector

Keyboard subcard cable

Connect one end of the keyboard
subcard cable to the keyboard
subcard connector

and the

other end to this connector.

M.2 solid-state drive slots (internal)

Insert M.2 solid-state drives
directly into these slots.

Built-in battery connector (internal)

Connect the built-in battery
directly to this connector.

Trackpad connector (internal)

Trackpad cable

Connect one end of the trackpad
cable to the trackpad and the
other end to this connector.

Chapter 6

Locations

Summary of Contents for 20QT




















































































































Search results

Summary of Contents for 20QT

Reviews:

Related manuals for 20QT

Brands by name

Popular brands

Lenovo 20QT, Hardware Maintenance Manual

Search results

Summary of Contents for 20QT

Reviews:

Related manuals for 20QT

Brands by name

Popular brands