Lenovo 20QT Hardware Maintenance Manual Download

Page: 62 / 115

No.

Connector/feature

Internal cable required

Cable connection

Memory module slots (internal)

Insert the memory modules into
these slots.

Coin-cell battery connector
(internal)

Coin-cell battery cable

The coin-cell battery comes with a
cable. Connect the cable to this
connector.

Smart card reader connector

Smart card reader cable

Connect one end of the smart card
reader cable to the smart card
reader and the other end to this
connector.

Fingerprint connector

Fingerprint cable

Connect one end of the fingerprint
cable to the fingerprint reader and
the other end to this connector.

Wireless-LAN card slot (internal)

Insert the wireless-LAN card into
this slot.

LED cable connector (internal)

LED cable

Connect one end to the camera
connector and the other end to
this connector.

Media-card slot (external)

Insert a supported media card into
this slot.

USB 3.1 connector Gen 1
(external)

Connect USB-compatible devices
to this connector.

Keyboard subcard cable
connector

Keyboard subcard cable

Connect one end of the keyboard
subcard cable to the connector on
the system board

and the other

end to this connector.

Keyboard cable connector

Keyboard assembly cable

Connect the keyboard cable to
this connector.

TrackPoint pointing cap cable
connector

TrackPoint pointing cap cable

Connect the TrackPoint pointing
cap cable to this connector.

Looking up FRU information

For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to

https://support.lenovo.com/partslookup

P1 Gen 2, X1 Extreme and X1 Extreme 2nd Hardware Maintenance Manual

Summary of Contents for 20QT




















































































































Search results

Summary of Contents for 20QT

Reviews:

Related manuals for 20QT

Brands by name

Popular brands

Lenovo 20QT, Hardware Maintenance Manual

Search results

Summary of Contents for 20QT

Reviews:

Related manuals for 20QT

Brands by name

Popular brands