Lenord+Bauer MiniCODER GEL 2432, Mounting Instructions, Page: 34 / 44

3 Prevention of damage Bauer
EMC instructions
34 GEL 2432 / 244x
English
+5 V
GND
Signal
PE
c c
b a
3
2
1
5
4
MiniCODER with panel-mounting socket (e.g. GEL 2444K)
1
2
3
4
5
a
b
c Machine (e.g. spindle)
MiniCODER
Panel-mounting socket
Evaluation electronics
Equipotential bonding cable (only in case of extreme interference)
Connecting cable with outer screen and three inner screens
Inner screens (3×)
Outer screen
 The MiniCODER is part of a machine or plant. Integrate the equipotential bonding
for the MiniCODER into the overall screening concept.
 Lay the signal cables and control cables physically separate from the power cables.
If this configuration is not possible, use screened twisted pair cables and/or lay the
MiniCODER cable in a steel conduit.

Ensure that external protection measures against surges have been implemented
(“Surge”) (EN 61000-4-5).