8 Malfunctions
Bauer
28
GEL 235/235x/203x
8 Malfunctions
Additional malfunctions in the fieldbus variants are listed in the separate Reference
manual of the respective type.
Malfunction
Possible causes
Remedy
No or low output
signal
Electrical connection
defective
Check all electrical connections
between the encoder and the
power supply as well as the eval-
uation electronics to ensure that
they are correct, contact is se-
cure, and they are dry.
Measurement
range outside of
the required po-
sitioning range
Measurement range not set
correctly (preset function) or
shifted due to slip in the shaft
connection
Check the shaft coupling for cor-
rect clamping and if necessary,
reset the measurement range
(
