Lennox Y6760, Service Manual

Page: 81 / 94

78
Installation and Maintenance
Service Manual
a
b
5. Remove axial flow blade and motor
Remove the nut on the blade with wrench and then
remove the axial flow blade.
Remove the tapping screws fixing the motor;
disconnect the leading wire insert of the motor, and
then remove the motor. Remove the tapping screws
fixing the motor support and then pull the motor
support upwards to remove it.
Remove screws fixing the electric box; pull out all the
wiring terminals connected to the electric box, and t
hen pull the electric box upwards to remove it.
6. Remove electric box
axial flow blade
motor support
motor
electric box
Step
Procedure