23
REPLACEMENT PARTS LIST
Replacement Parts
Description
Cat. No.
Front Refractory
PR-SR2113
Back Refractory
PR-SR2056
Right Side Refractory
PR-SR2057D
left Side Refractory
PR-SR2057G
Bottom Refractory
PR-SR2055
Catalytic Combustor
PR-SR2110
Catalytic Combustor Stainless Steel Casing
PR-SR2111
Catalyst Air Tube (front)
PR-SR2053
Cast-iron log Supports (2)
PR-SR2324
louver frame (top)
PR-SR2131
louver frame (bottom)
PR-SR2130
Ash pan gasket
PR-B2GA1
Ash pan
PR-BISUZH
Fireplace top
PR-SR2436
Fireplace left side
PR-SR2435
Fireplace right side
PR-SR2434
Fireplace back
PR-SR2432
Wooden Door Handle
PR-SR2556
Wooden Handle By-pass
PR-SR2072
Handle Rod and lock
PR-SR2118
Ceramic Glass Panel
PR-SR2467
Glass gasket
PR-SR1823E
Door gasket
PR-SR1823D
Hinge Kit
PR-SR2395P
Secondary Air Tube (rear)
PR-SR2051
log Retainer Bar
PR-SR2323
Touch-up Paint, Aerosol, Black Metallic
SBMB6309
H8159
Blower 250 CFM for central forced air kit, BISZY
BISZY
Blower variable speed control with decorative wall
plate for (BISZY), VRUW
VRUW
Thermo-disk, on/off blower control (for BISZY), VTU
VTU
Blower to flexible pipe adaptor, BISAVF
BISAVF
Backdraft damper, BISBD
BISBD
Fireplace to Flex adaptor and 2 clamps, BISAF
BISAF
CLEARANCE TO COMBUSTIBLES
The following clearances meet the minimum requirements for a safe
installation;
Side wall:
24” (610 mm) measured from the doors edge
Ceiling:
6’ 8" (2032 mm) measured from the base of the fireplace
Fireplace enclosure
:
Bottom: 0”
Side: 0” to spacer
Back: 0” to spacer
Top: Do not fill the space above the fireplace with any material
(7 feet measured from the base of the fireplace
)
Chimney:
ASHT+: 2" (50mm)
ACBI: 1" (25mm) at ceiling/roof level and 2" (50mm) through a wall
Mantel:
54" (1372 mm) measured from the base of the fireplace or 48"
(1219) when installed with Clean Face Panel option (BPCF) and Gravity
Air Kit
SPECIFICATIONS
Cat. No.
Model
H3250
VIllA VISTA™
Product Reference Information
Weight
385 lbs
Height
45”
Width
38”
Depth
24-1/2”
Chimney Weight ASHT+ (7” dia)
7.8 lb per linear foot
Chimney Weight ACBI (8” dia.)
3.75 lb per linear foot
Contact an IHP dealer to obtain any of these parts. Never use substitute
materials not approved by IHP. Use of non-approved parts can result
in poor performance and safety hazards.
