Lennox VILLA VISTA 850028M, Installation And Operation Instructions Manual

Page: 22 / 26

22
OPTIONAL INSTALLATION ACCESSORIES
Installation Accessories
Description Cat./ Part No.
Decorative Cast Iron Door (Required - Order Separately)
Arch Shape Door, Black H3280
Gravity Kit
Gravity kit: Complete double duct system includes: 2 elbows
90º, 2 telescopic lengths, 2 grill supports and 2 black grills,
2 fireplace adaptors, 7B30ZK-1
H8947
Gravity Kit Accessories
Elbow 90º, 8” dia., 7B26ZE90 H8948
Elbow 45º, 8” dia., 7B26ZE45 H8949
Telescopic length, 8” dia. (15” to 26”), 7B26ZlA H8950
Adjustable length 8” dia (2” - 5”), 7B26Zl2A H8951
length two (2) feet, 8Kl2 H8954
length one (1) feet, 8Kl1 H8953
Wall radiation shield, 8” I.D., 7B26ZR H8952
Outside Air Kit (Required - Included with Fireplace)
outside Air Coupler to Connect Outside Air UZI to Fireplace,
UZIAD
UZIAD
Outside Air Ducting - Includes 4 in. Insulated Flex x 10 ft.
long, UZI
UZI
Fireplace Options
Del Sol louver Kit DEl SOl
Diamante louver Kit DIAMANTE
Fiori louver Kit FIORI
luna louver Kit lUNA
Strada louver Kit STRADA
Panel for Clean Face Option (requires gravity kit) BPCF
Blower UZY5
Blower Motor Speed Control VRUW
Rigid Firescreen BPZN
Fireplace Model VILLA VISTA - Approved Venting Components
7" Diameter Chimney - Model ASHT+, S2100+, , or ACBI
manufactured by Security Chimneys International™ only.
7" Diameter Chimney for Relining Masonry Chimneys - Tubinox™ chimney (or
Projet SS), 7" diameter with adaptor for installation in a masonry chimney.
NOTES:
j
(Projet Nova Temp®) is equivalent to S2100+
k
(Projet Nova Temp®) is equivalent to ASHT+
l
This appliance is equipped with the ASHT Chimney Adaptor. When other
chimney is used, a chimney adaptor for the chimney will be required.
m
Chimney Adaptor (S2100+ / ) for CANADA ONLY - If you want to
install a S2100+ / chimney, an adaptor is available (7UCA).
n
AC Chimney is Not recommended at elevations above 4000 feet or in cold
climates, where temperatures fall below 32° F (0 ° C). When using AC chimney,
an ACBI7SBA (H3805) starter section must be used before installing an elbow.
When an offset is needed immediately off the top of the fireplace, an elbow
starter section is available, ACBI7SBA30 (H3806), is available.
u
Not tested under EPA certification. If installed, this appliance no
longer qualifies for EPA certification.
* For installation, follow the instructions included with the Central
Forced Air Kit.
Central Forced Air Kit Accessories
u
Central Forced Air Kit, Central forced air kit including: blower
(BISZY), flex adaptor (BISAF), 2 clamps, variable speed
control (VRUW), thermo-disk (VTU), fan to flexible pipe
adapter (BISAVF), back draft damper (BISBD), aluminium
tape, BISFWK-1
BISFWK-1
Flexible pipe 5” I.D. x 15 ft. long, 5FlEX15 5FlEX15
Flexible pipe 5” I.D. x 30 ft. long, 5FlEX25 5FlEX25
Heating and cooling thermostat, 24V, HCTW HCTW