17
NOTE: DIAGRAMS AND ILLUSTRATIONS ARE NOT TO SCALE
2 Slide the insert into its final location in the fireplace. In case of uneven
wall surface open the right surround access door and make any
adjustments needed to ensure there is enough clearance to open the
access door (see
Page 18
).
Tools Needed:
No tools are needed
One of the following surround kits is required (Purchased sepa-
rately).
Note:
Install surround with insert positioned in the fireplace, but a
few inches in front of its final location.
Surround Kits
Models SHR33 & SHR40
Part/Cat. #
Description
Dimensions
75387
Small 3-sided Flange
36-5/8”W x 25-7/8”H
75385
Small 4-sided Flange
36-5/8”W x 29-3/16”H
75388
Large 3-sided Flange
41”W x 28”H
75386
Large 4-sided Flange
41”W x 33-1/2”H
Table 9
To Install Surround Panels:
1. Hang the surround on hooks attached to insert (labeled A and B).
Make sure the surround is seated firmly on the hooks. See
Figures
28 and 29
.
Figure 28
Figure 27
Figure 29
Figure 30
SHORELINE™ SURROUND ASSEMBLY INSTALLATION
Important Note: The trim panels or surrounds must not seal ventilation
openings on the appliance.
Hook A
Hook B
See Detail A
Detail B
See Detail B
Detail A
Summary of Contents for SHRL 33 DV INS
Page 41: ...41 NOTES...
