background image

www.lennoxemea.com

PCUS Thermostat - User Manual - 0821EN

9

18.

 By pressing the Mode key again, you move to setting band 3 on Sunday identified by the wording Week 7 and 

set the desired action to OFF

19.

 By pressing the Mode key again, you can move to setting band 4 on Sunday identified by the wording Week 7 

and set the desired action to OFF

20.

 Press the Mode key again to exit the time band setting procedure and return to the main screen

21.

 Now go back to the time bands setting procedure by pressing the Mode button for a long time and go to Week 

1 band 2 confirming all the previously set values by pressing the Mode button several times

22.

 Change the setting of the desired action from ON to OFF

with the + or - keys.
The photo below shows what is indicated in this point

23.

 Continue with the Mode key until you reach band 4 of Week

1 1 confirming all the values previously set by pressing the
Mode key several times

24.

 Change the setting of the desired action from ON to OFF with the + or - keys.The photo below shows what is 

indicated in this point

25.

 Continue by pressing the Mode key repeatedly until you exit the time bands setting procedure, which is now 

complete.
By way of summary, below are the photos of the four time bands for the days from Monday to Friday as set up to now.

Example: Time band 1

Example: Time band 2

Summary of Contents for PCUS
















Reviews: